raab
Admin Group
Crew
Joined: 30-January-2010
Location: New Zealand
Posts: 2
Online Status: 
|
| Posted: 15-February-2010 at 17:44 | IP Logged
|
|
|
In the event that your IBM blade chassis is inaccessible via the web gui, or you get some garbage code, the quickest way to get it up and running is to restart the
management module.
1. Either using Putty or the telnet cmd telnet to your blade chassis hostname/IP on port 21
2. Enter in the username/password (usually the same as what you use for the web gui)
3. At the system> prompt type 'env -T system:mm[x]' (minus the 's) where x is the number of your management module (usually 1) ensuring you have the square brackets around the
number. This will change the target to the management module which is required in order to restart it.
3. At the system> prompt type 'reset'
The module will take less than a minute to come back up and when it does you should be able to browse and login to the web gui without issues.
NB: The servers attached to the blade chassis will remain running which is a good thing :)
|
Active Topics
Memberlist
Search
Help
Register
Login
Topic: Howto restart IBM BladeCenter Mgmt module
